Washing With Your Snow Foam Ultimate KitUpdated 2 years ago
1. Interior Cleaning
Simply apply a fine mist of Interior Cleaner onto the dashboard, trims, and fabric to effectively remove dirt and grime from your interior. Then, use a microfibre cloth to easily wipe off the residue and enjoy the pleasant, clean fragrance.
To achieve a deeper level of cleaning, try agitating the Interior Cleaner with either a brush or drill brush. Afterwards, you can easily remove it using an extractor or wet vacuum.
We like to do the interior first so we aren't stepping into the car with wet feet or hands.
For deeper carpet stains, try Orange and a wet vacuum/extraction.
2. Wheel Cleaning
Attend to wheels with Wheel Cleaner or Purple. Spray on and rinse off within 30 seconds - 60 seconds.
Scrub with Microfibre brush or Bristle Brush as necessary.
For Wheel Cleaner, you want to avoid any raw metal or polished metal and stick to OEM wheels.
For raw aluminium lips or barrels, use Purple.
Use the Microfibre Wheel Brush to get into spokes and barrels whilst the Red Bristle Brush can be used for wheel faces.
3. Snow Foam Initial Prewash Layer > Dwell > Rinse
Snow Foam the car with 100mL of Snow Foam Detergent and 900mL water in your Snow Foam Lance or Gun. Allow to dwell for 5 - 10 minutes before rinsing.
For Snow Foam Lance: Set lance to Negative ( - ) for more foam and less water.
For Snow Foam Gun: Slide the mixing ratio slider to the largest inlet for more foam
Best to foam bottom up so that any foam run off doesn't disrupt the foam sticking to the car.
Let it dwell on the car for 5 - 10 minutes before rinsing.
4. Snow Foam Contact Wash
With the remainder of the detergent in your Snow Foam Lance or Gun, perform a second layer of foam. This layer will be scrubbed gently with the Snow Cloud Wash Mitt. Rinse thoroughly.
It is advised from here to setup your Wash and Rinse Two Bucket method, ensuring you clean your mitt after each panel. Alternatively, wash your mitt with your pressure washer after each panel.
During this stage, you can use ORANGE degreaser on your exhaust tips and side steps before agitating.
5 - Snow Foam Shield Hydrophobic Spray
Whilst the car is wet, mist on a layer of Shield Spray on all panels.
For best results, use a microfibre cloth to spread the product evenly on all panels.
Rinse thoroughly after 30 - 60 seconds.
6 - Dry with Twister Towel
Lay the towel on the roof of the car flat and pinch two corners of the towel before sliding the water off.
Ensure the towel doesn't hit the ground nor is used to clean any areas that you may have missed. Simply go back over any dirty areas with the wash mitt and soap.
7 - Finishing Touches
The car is now dry and you can apply Spray Wax for a shiny final finish - Spray and buff into each panel until dry. This only applies for non-ceramic coated vehicles.
Tyre Gel on the tyres for a satin shine. Apply with Tyre Gel Applicator. Tyre Shine will be a spray application that will leave a wet look.
Clear Window Cleaner to finish up the windows.
8. Clean Your Microfibre Towels
Ensure you pop your towels and brushes into the wash and look for Microfibre Wash to have them ready for your next wash.